| File Note: |
Kindly peruse the agenda note of AEE. In view of the facts mentioned in the agenda note of AEE, it is recommended that the consent to operate under the provisions of the Water (Prevention & Control of Pollution) Act, 1974 and the Air (Prevention & Control of Pollution) Act, 1981 for manufacturing of Hot Rolled Coil (HRC) @ 5,00,000 TPA may be granted for the period of 31/03/2025 subject to suitable conditions and special conditions that:
1. This consent to operate is only valid for operation of industrial unit for the manufacturing of Hot Rolled Coil (HRC) @ 500000 MTA by using Scrap and Direct Reduced Iron (DRI) as raw material.
2. The industry shall comply with the guidelines/SOPs provided by PSCST, Chandigarh for the effective operation of APCD.
3. The industry shall stabilize the vehicular movement area and entry/exit points, as to suppress dust emissions.
4. The industry shall execute annual maintenance contract (AMC) for APCD from the repute agency and submit the report in this regard by 31/03/2024 to concerned Regional Office of the Board.
5. The industry shall provide stack monitoring arrangements as per emissions regulations part 3 (1985 series) as per CPCB manual.
6. The industry shall not dispose of its Hazardous waste to any unauthorized vendor. The industry shall not use any scrap containing Hazardous waste like shockers containing waste oil.
7. The industry shall ensure that the activities of unit does not create any nuisance in the surrounding areas and no public complaints are received.
8. The industry shall comply with all the conditions of Environment Clearance granted under the EIA notification dated 14/09/2006.
9. The industry shall develop plantation in an adequate area for utilization of treated waste water.
10. In case the industry fails to comply with the provisions of the Water (Prevention & Control of Pollution) Act, 1974, Air (Prevention & Control of Pollution) Act, 1981, Environment (Protection) Act, 1986 and/or any other environmental law applicable to the project and Rules, Circulars & Directions issued by the Board from time to time, action as deemed fit shall be taken against the industry.
Scale- Large (Red)
Date of Receipt of Application – 03/07/2024
Date of Scrutiny – 05/07/2024
Date of Visit – 25/06/2024
Target Date of Deemed Approval – 14/08/2024 (30 working days)
Competency – Worthy Chairman |
